Ho Track Switch Throw Lever Piano Wire

Model railroad wiring is an extremely interesting facet of the hobby and definitely part of its appeal. If you have just one cab to power your layout, you can run the wires from this cab to a terminal strip, which will then carry the power to the toggle switches for the different blocks (or you can use the Atlas slide switches which greatly simplifies this wiring process).Once you have this set up, the advantage of this type of model railroad wiring is that you can have several trains sitting in "blocked" freight yards, branch lines or team tracks, that won't move when you want to power the train on your mainline.
In this situation, you have each cab connected to opposite poles of double pole toggle switches. Using a track power bus in model railroad wiringA bus is a large 12-14 gauge wire that can serve as a common or ground wire to which a large number of feeder wires can be attached. Digital command control (DCC) is a newer form of model railroad wiring and train control in which each locomotive can be separately controlled from one power unit or from one walkaround throttle. Wye reversing tracks can be wired in the same way with the output from the auto reversing module attached to the isolated track rails.
If you would rather not purchase an auto reversing module right now, you can still wire it for manual toggle switch operation.

Atlas makes a "Twin" switch which basically contains 2 DPDT switches to help simplify this wiring. If you have a layout with any more than a simple oval, You should consider using a control panel - a central place, or hub, for your model railroad wiring, where all your switches, transformers and basic trackplan resides for you to electrically control everything that happens on your layout. Turnouts are sections of track that allow trains to travel from one line of track to another.
Hooking up 2 or more remotes to the same control switchSometimes, it's useful to hook up 2 or more solenoid switch motors to one electrical control switch.
There may be a situation in which you want to make 3, 4 or 5 turnouts all change with the control of one switch.
Digital controlThe above wiring for remotes can be used whether your track power is analog or digital-controlled, since power to the solenoid motors and control switches is coming from the AC terminals of your transformer and are not dependent on track power. Make sure the joint is smooth as you run your finger across it, and especially that the inner aspect of the rail has no obstruction, in order to avoid derailments.______________________________Types of model railroad wiring for train controlMost of us will start out with just one transformer to control our one train.

Also with larger layouts, it is helpful to use "walkaround" throttles or cabs, so the operator can follow his train around the layout.
You won't be able to use bus wires for the lighting and the accessories or turnouts because you will want to control each of these things separately with a switch on your control panel. One book in particular, Creative Effects for your Model Railroad, by Paul Newitt, is a goldmine of information on basic model railroad wiring, but also includes all kinds of special electrical effects specifically for model railroads, including signaling, sound effects, electroluminescence, automated track circuits, animation effects, smoke and fire simulation, etc.
If you have a section of track that loops around and reconnects to itself (reversing loop), I would strongly recommend that you buy an auto reversing circuit for this.

Ho Track Switch Throw Lever Piano Wire

Source: http://modeltrain.s3.amazonaws.com/ho-track-switch-wiring1.html

Share this post